1. Introduction to PCP

This chapter provides an introduction to Performance Co-Pilot (PCP), an overview of its individual components, and conceptual information to help you use this software.

The following sections are included:

Section 1.1, “Objectives” covers the intended purposes of PCP.

Section 1.2, “Conceptual Foundations”, discusses the design theories behind PCP.

Section 1.3, “Overview of Component Software”, describes PCP tools and agents.

1.1. Objectives

Performance Co-Pilot (PCP) provides a range of services that may be used to monitor and manage system performance. These services are distributed and scalable to accommodate the most complex system configurations and performance problems.

1.1.1. PCP Target Usage

PCP is targeted at the performance analyst, benchmarker, capacity planner, developer, database administrator, or system administrator with an interest in overall system performance and a need to quickly isolate and understand performance behavior, resource utilization, activity levels, and bottlenecks in complex systems. Platforms that can benefit from this level of performance analysis include large servers, server clusters, or multiserver sites delivering Database Management Systems (DBMS), compute, Web, file, or video services.

1.1.2. Empowering the PCP User

To deal efficiently with the dynamic behavior of complex systems, performance analysts need to filter out noise from the overwhelming stream of performance data, and focus on exceptional scenarios. Visualization of current and historical performance data, and automated reasoning about performance data, effectively provide this filtering.

From the PCP end user’s perspective, PCP presents an integrated suite of tools, user interfaces, and services that support real-time and retrospective performance analysis, with a bias towards eliminating mundane information and focusing attention on the exceptional and extraordinary performance behaviors. When this is done, the user can concentrate on in-depth analysis or target management procedures for those critical system performance problems.

1.1.3. Unification of Performance Metric Domains

At the lowest level, performance metrics are collected and managed in autonomous performance domains such as the operating system kernel, a DBMS, a layered service, or an end-user application. These domains feature a multitude of access control policies, access methods, data semantics, and multiversion support. All this detail is irrelevant to the developer or user of a performance monitoring tool, and is hidden by the PCP infrastructure.

Performance Metrics Domain Agents (PMDAs) within PCP encapsulate the knowledge about, and export performance information from, autonomous performance domains.

1.1.4. Uniform Naming and Access to Performance Metrics

Usability and extensibility of performance management tools mandate a single scheme for naming performance metrics. The set of defined names constitutes a Performance Metrics Name Space (PMNS). Within PCP, the PMNS is adaptive so it can be extended, reshaped, and pruned to meet the needs of particular applications and users.

PCP provides a single interface to name and retrieve values for all performance metrics, independently of their source or location.

1.1.5. PCP Distributed Operation

From a purely pragmatic viewpoint, a single workstation must be able to monitor the concurrent performance of multiple remote hosts. At the same time, a single host may be subject to monitoring from multiple remote workstations.

These requirements suggest a classic client-server architecture, which is exactly what PCP uses to provide concurrent and multiconnected access to performance metrics, independent of their host location.

1.1.6. Dynamic Adaptation to Change

Complex systems are subject to continual changes as network connections fail and are reestablished; nodes are taken out of service and rebooted; hardware is added and removed; and software is upgraded, installed, or removed. Often these changes are asynchronous and remote (perhaps in another geographic region or domain of administrative control).

The distributed nature of the PCP (and the modular fashion in which performance metrics domains can be installed, upgraded, and configured on different hosts) enables PCP to adapt concurrently to changes in the monitored system(s). Variations in the available performance metrics as a consequence of configuration changes are handled automatically and become visible to all clients as soon as the reconfigured host is rebooted or the responsible agent is restarted.

PCP also detects loss of client-server connections, and most clients support subsequent automated reconnection.

1.1.7. Logging and Retrospective Analysis

A range of tools is provided to support flexible, adaptive logging of performance metrics for archive, playback, remote diagnosis, and capacity planning. PCP archive logs may be accumulated either at the host being monitored, at a monitoring workstation, or both.

A universal replay mechanism, modeled on media controls, supports play, step, rewind, fast forward and variable speed processing of archived performance data. Replay for multiple archives, from multiple hosts, is facilitated by an archive aggregation concept.

Most PCP applications are able to process archive logs and real-time performance data with equal facility. Unification of real-time access and access to the archive logs, in conjunction with the media controls, provides powerful mechanisms for building performance tools and to review both current and historical performance data.

1.1.8. Automated Operational Support

For operational and production environments, PCP provides a framework with scripts to customize in order to automate the execution of ongoing tasks such as these:

  • Centralized archive logging for multiple remote hosts

  • Archive log rotation, consolidation, and culling

  • Web-based publishing of charts showing snapshots of performance activity levels in the recent past

  • Flexible alarm monitoring: parameterized rules to address common critical performance scenarios and facilities to customize and refine this monitoring

  • Retrospective performance audits covering the recent past; for example, daily or weekly checks for performance regressions or quality of service problems

1.1.9. PCP Extensibility

PCP permits the integration of new performance metrics into the PMNS, the collection infrastructure, and the logging framework. The guiding principle is, “if it is important for monitoring system performance, and you can measure it, you can easily integrate it into the PCP framework.”

For many PCP users, the most important performance metrics are not those already supported, but new performance metrics that characterize the essence of good or bad performance at their site, or within their particular application environment.

One example is an application that measures the round-trip time for a benign “probe” transaction against some mission-critical application.

For application developers, a library is provided to support easy-to-use insertion of trace and monitoring points within an application, and the automatic export of resultant performance data into the PCP framework. Other libraries and tools aid the development of customized and fully featured Performance Metrics Domain Agents (PMDAs).

Extensive source code examples are provided in the distribution, and by using the PCP toolkit and interfaces, these customized measures of performance or quality of service can be easily and seamlessly integrated into the PCP framework.

1.1.10. Metric Coverage

The core PCP modules support export of performance metrics that include kernel instrumentation, hardware instrumentation, process-level resource utilization, database and other system services instrumentation, and activity in the PCP collection infrastructure.

The supplied agents support thousands of distinct performance metrics, many of which can have multiple values, for example, per disk, per CPU, or per process.

1.2. Conceptual Foundations

The following sections provide a detailed overview of concepts that underpin Performance Co-Pilot (PCP).

1.2.1. Performance Metrics

Across all of the supported performance metric domains, there are a large number of performance metrics. Each metric has its own structure and semantics. PCP presents a uniform interface to these metrics, independent of the underlying metric data source.

The Performance Metrics Name Space (PMNS) provides a hierarchical classification of human-readable metric names, and a mapping from these external names to internal metric identifiers. See Section 1.2.6, “Performance Metrics Name Space”, for a description of the PMNS.

1.2.2. Performance Metric Instances

When performance metric values are returned to a requesting application, there may be more than one value instance for a particular metric; for example, independent counts for each CPU, process, disk, or local filesystem. Internal instance identifiers correspond one to one with external (human-readable) descriptions of the members of an instance domain.

Transient performance metrics (such as per-process information) cause repeated requests for the same metric to return different numbers of values, or changes in the particular instance identifiers returned. These changes are expected and fully supported by the PCP infrastructure; however, metric instantiation is guaranteed to be valid only at the time of collection.

1.2.3. Current Metric Context

When performance metrics are retrieved, they are delivered in the context of a particular source of metrics, a point in time, and a profile of desired instances. This means that the application making the request has already negotiated to establish the context in which the request should be executed.

A metric source may be the current performance data from a particular host (a live or real-time source), or a set of archive logs of performance data collected by pmlogger at some distant host or at an earlier time (a retrospective or archive source).

By default, the collection time for a performance metric is the current time of day for real-time sources, or current point within an archive source. For archives, the collection time may be reset to an arbitrary time within the bounds of the set of archive logs.

1.2.4. Sources of Performance Metrics and Their Domains

Instrumentation for the purpose of performance monitoring typically consists of counts of activity or events, attribution of resource consumption, and service-time or response-time measures. This instrumentation may exist in one or more of the functional domains as shown in Figure 1.1. Performance Metric Domains as Autonomous Collections of Data.

../_images/metric-domains.png

Figure 1.1. Performance Metric Domains as Autonomous Collections of Data

Each domain has an associated access method:

  • The operating system kernel, including sub-system data structures - per-process resource consumption, network statistics, disk activity, or memory management instrumentation.

  • A layered software service such as activity logs for a World Wide Web server or an email delivery server.

  • An application program such as measured response time for a production application running a periodic and benign probe transaction (as often required in service level agreements), or rate of computation and throughput in jobs per minute for a batch stream.

  • External equipment such as network routers and bridges.

For each domain, the set of performance metrics may be viewed as an abstract data type, with an associated set of methods that may be used to perform the following tasks:

  • Interrogate the metadata that describes the syntax and semantics of the performance metrics

  • Control (enable or disable) the collection of some or all of the metrics

  • Extract instantiations (current values) for some or all of the metrics

We refer to each functional domain as a performance metrics domain and assume that domains are functionally, architecturally, and administratively independent and autonomous. Obviously the set of performance metrics domains available on any host is variable, and changes with time as software and hardware are installed and removed.

The number of performance metrics domains may be further enlarged in cluster-based or network-based configurations, where there is potentially an instance of each performance metrics domain on each node. Hence, the management of performance metrics domains must be both extensible at a particular host and distributed across a number of hosts.

Each performance metrics domain on a particular host must be assigned a unique Performance Metric Identifier (PMID). In practice, this means unique identifiers are assigned globally for each performance metrics domain type. For example, the same identifier would be used for the Apache Web Server performance metrics domain on all hosts.

1.2.5. Distributed Collection

The performance metrics collection architecture is distributed, in the sense that any performance tool may be executing remotely. However, a PMDA usually runs on the system for which it is collecting performance measurements. In most cases, connecting these tools together on the collector host is the responsibility of the PMCD process, as shown in Figure 1.2. Process Structure for Distributed Operation.

../_images/remote-collector.svg

Figure 1.2. Process Structure for Distributed Operation

The host running the monitoring tools does not require any collection tools, including pmcd, because all requests for metrics are sent to the pmcd process on the collector host. These requests are then forwarded to the appropriate PMDAs, which respond with metric descriptions, help text, and most importantly, metric values.

The connections between monitor clients and pmcd processes are managed in libpcp, below the PMAPI level; see the pmapi(3) man page. Connections between PMDAs and pmcd are managed by the PMDA routines; see the pmda(3) man page. There can be multiple monitor clients and multiple PMDAs on the one host, but normally there would be only one pmcd process.

1.2.6. Performance Metrics Name Space

Internally, each unique performance metric is identified by a Performance Metric Identifier (PMID) drawn from a universal set of identifiers, including some that are reserved for site-specific, application-specific, and customer-specific use.

An external name space - the Performance Metrics Name Space (PMNS) - maps from a hierarchy (or tree) of human-readable names to PMIDs.

1.2.6.1. Performance Metrics Name Space Diagram

Each node in the PMNS tree is assigned a label that must begin with an alphabet character, and be followed by zero or more alphanumeric characters or the underscore (_) character. The root node of the tree has the special label of root.

A metric name is formed by traversing the tree from the root to a leaf node with each node label on the path separated by a period. The common prefix root. is omitted from all names. For example, Figure 1.3. Small Performance Metrics Name Space (PMNS) shows the nodes in a small subsection of a PMNS.

../_images/pmns-small.png

Figure 1.3. Small Performance Metrics Name Space (PMNS)

In this subsection, the following are valid names for performance metrics:

kernel.percpu.syscall
network.tcp.rcvpack
hw.router.recv.total_util

1.2.7. Descriptions for Performance Metrics

Through the various performance metric domains, the PCP must support a wide range of formats and semantics for performance metrics. This metadata describing the performance metrics includes the following:

  • The internal identifier, Performance Metric Identifier (PMID), for the metric

  • The format and encoding for the values of the metric, for example, an unsigned 32-bit integer or a string or a 64-bit IEEE format floating point number

  • The semantics of the metric, particularly the interpretation of the values as free-running counters or instantaneous values

  • The dimensionality of the values, in the dimensions of events, space, and time

  • The scale of values; for example, bytes, kilobytes (KB), or megabytes (MB) for the space dimension

  • An indication if the metric may have one or many associated values

  • Short (and extended) help text describing the metric

For each metric, this metadata is defined within the associated PMDA, and PCP arranges for the information to be exported to performance tools that use the metadata when interpreting the values for each metric.

1.2.8. Values for Performance Metrics

The following sections describe two types of performance metrics, single-valued and set-valued.

1.2.8.1. Single-Valued Performance Metrics

Some performance metrics have a singular value within their performance metric domains. For example, available memory (or the total number of context switches) has only one value per performance metric domain, that is, one value per host. The metadata describing the metric makes this fact known to applications that process values for these metrics.

1.2.8.2. Set-Valued Performance Metrics

Some performance metrics have a set of values or instances in each implementing performance metric domain. For example, one value for each disk, one value for each process, one value for each CPU, or one value for each activation of a given application.

When a metric has multiple instances, the PCP framework does not pollute the Name Space with additional metric names; rather, a single metric may have an associated set of values. These multiple values are associated with the members of an instance domain, such that each instance has a unique instance identifier within the associated instance domain. For example, the “per CPU” instance domain may use the instance identifiers 0, 1, 2, 3, and so on to identify the configured processors in the system.

Internally, instance identifiers are encoded as binary values, but each performance metric domain also supports corresponding strings as external names for the instance identifiers, and these names are used at the user interface to the PCP utilities.

For example, the performance metric disk.dev.total counts I/O operations for each disk spindle, and the associated instance domain contains one member for each disk spindle. On a system with five specific disks, one value would be associated with each of the external and internal instance identifier pairs shown in Table 1.1. Sample Instance Identifiers for Disk Statistics.

Table 1.1. Sample Instance Identifiers for Disk Statistics

External Instance Identifier

Internal Instance Identifier

disk0

131329

disk1

131330

disk2

131331

disk3

131841

disk4

131842

Multiple performance metrics may be associated with a single instance domain.

Each performance metric domain may dynamically establish the instances within an instance domain. For example, there may be one instance for the metric kernel.percpu.idle on a workstation, but multiple instances on a multiprocessor server. Even more dynamic is filesys.free, where the values report the amount of free space per file system, and the number of values tracks the mounting and unmounting of local filesystems.

PCP arranges for information describing instance domains to be exported from the performance metric domains to the applications that require this information. Applications may also choose to retrieve values for all instances of a performance metric, or some arbitrary subset of the available instances.

1.2.9. Collector and Monitor Roles

Hosts supporting PCP services are broadly classified into two categories:

  1. Collector : Hosts that have pmcd and one or more performance metric domain agents (PMDAs) running to collect and export performance metrics

  2. Monitor : Hosts that import performance metrics from one or more collector hosts to be consumed by tools to monitor, manage, or record the performance of the collector hosts

Each PCP enabled host can operate as a collector, a monitor, or both.

1.2.10. Retrospective Sources of Performance Metrics

The PMAPI also supports delivery of performance metrics from a historical source in the form of a PCP archive log. Archive logs are created using the pmlogger utility, and are replayed in an architecture as shown in Figure 1.4. Architecture for Retrospective Analysis.

../_images/retrospective-architecture.png

Figure 1.4. Architecture for Retrospective Analysis

The PMAPI has been designed to minimize the differences required for an application to process performance data from an archive or from a real-time source. As a result, most PCP tools support live and retrospective monitoring with equal facility.

1.2.11. Product Extensibility

Much of the PCP software’s potential for attacking difficult performance problems in production environments comes from the design philosophy that considers extensibility to be critically important.

The performance analyst can take advantage of the PCP infrastructure to deploy value-added performance monitoring tools and services. Here are some examples:

  • Easy extension of the PCP collector to accommodate new performance metrics and new sources of performance metrics, in particular using the interfaces of a special-purpose library to develop new PMDAs (see the pmda(3) man page)

  • Use of libraries (libpcp_pmda and libpcp_mmv) to aid in the development of new capabilities to export performance metrics from local applications

  • Operation on any performance metric using generalized toolkits

  • Distribution of PCP components such as collectors across the network, placing the service where it can do the most good

  • Dynamic adjustment to changes in system configuration

  • Flexible customization built into the design of all PCP tools

  • Creation of new monitor applications, using the routines described in the pmapi(3) man page

1.3. Overview of Component Software

Performance Co-Pilot (PCP) is composed of both text-based and graphical tools. Each tool is fully documented by a man page. These man pages are named after the tools or commands they describe, and are accessible through the man command. For example, to see the pminfo(1) man page for the pminfo command, enter this command:

man pminfo

A representative list of PCP tools and commands, grouped by functionality, is provided in the following four sections.

1.3.1. Performance Monitoring and Visualization

The following tools provide the principal services for the PCP end-user with an interest in monitoring, visualizing, or processing performance information collected either in real time or from PCP archive logs:

pcp-atop

Full-screen monitor of the load on a system from a kernel, hardware and processes point of view. It is modeled on the Linux atop(1) tool (home page) and provides a showcase for the variety of data available using PCP services and the Python scripting interfaces.

pmchart

Strip chart tool for arbitrary performance metrics. Interactive graphical utility that can display multiple charts simultaneously, from multiple hosts or set of archives, aligned on a unified time axis (X-axis), or on multiple tabs.

pcp-collectl

Statistics collection tool with good coverage of a number of Linux kernel subsystems, with the everything-in-one-tool approach pioneered by sar(1). It is modeled on the Linux collectl(1) utility (home page) and provides another example of use of the Python scripting interfaces to build more complex functionality with relative ease, with PCP as a foundation.

pmrep

Outputs the values of arbitrary performance metrics collected live or from a single PCP archive, in textual format.

pmevent

Reports on event metrics, decoding the timestamp and event parameters for text-based reporting.

pmie

Evaluates predicate-action rules over performance metrics for alarms, automated system management tasks, dynamic configuration tuning, and so on. It is an inference engine.

pmieconf

Creates parameterized rules to be used with the PCP inference engine (pmie). It can be run either interactively or from scripts for automating the setup of inference (the PCP start scripts do this, for example, to generate a default configuration).

pminfo

Displays information about arbitrary performance metrics available from PCP, including help text with -T.

pmlogsummary

Calculates and reports various statistical summaries of the performance metric values from a set of PCP archives.

pmprobe

Probes for performance metric availability, values, and instances.

pmstat

Provides a text-based display of metrics that summarize the performance of one or more systems at a high level.

pmval

Provides a text-based display of the values for arbitrary instances of a selected performance metric, suitable for ASCII logs or inquiry over a slow link.

1.3.2. Collecting, Transporting, and Archiving Performance Information

PCP provides the following tools to support real-time data collection, network transport, and archive log creation services for performance data:

mkaf

Aggregates an arbitrary collection of PCP archive logs into a folio to be used with pmafm.

pmafm

Interrogates, manages, and replays an archive folio as created by mkaf, or the periodic archive log management scripts, or the record mode of other PCP tools.

pmcd

Is the Performance Metrics Collection Daemon (PMCD). This daemon must run on each system being monitored, to collect and export the performance information necessary to monitor the system.

pmcd_wait

Waits for pmcd to be ready to accept client connections.

pmdaapache

Exports performance metrics from the Apache Web Server. It is a Performance Metrics Domain Agent (PMDA).

pmdacisco

Extracts performance metrics from one or more Cisco routers.

pmdaelasticseach

Extracts performance metrics from an elasticsearch cluster.

pmdagfs2

Exports performance metrics from the GFS2 clustered filesystem.

pmdagluster

Extracts performance metrics from the Gluster filesystem.

pmdainfiniband

Exports performance metrics from the Infiniband kernel driver.

pmdakvm

Extracts performance metrics from the Linux Kernel Virtual Machine (KVM) infrastructure.

pmdalustrecomm

Exports performance metrics from the Lustre clustered filesystem.

pmdamailq

Exports performance metrics describing the current state of items in the sendmail queue.

pmdamemcache

Extracts performance metrics from memcached, a distributed memory caching daemon commonly used to improve web serving performance.

pmdammv

Exports metrics from instrumented applications linked with the pcp_mmv shared library or the Parfait framework for Java instrumentation. These metrics are custom developed per application, and in the case of Parfait, automatically include numerous JVM, Tomcat and other server or container statistics.

pmdamysql

Extracts performance metrics from the MySQL relational database.

pmdanamed

Exports performance metrics from the Internet domain name server, named.

pmdanginx

Extracts performance metrics from the nginx HTTP and reverse proxy server.

pmdapostfix

Export performance metrics from the Postfix mail transfer agent.

pmdapostgres

Extracts performance metrics from the PostgreSQL relational database.

pmdaproc

Exports performance metrics for running processes.

pmdarsyslog

Extracts performance metrics from the Reliable System Log daemon.

pmdasamba

Extracts performance metrics from Samba, a Windows SMB/CIFS server.

pmdasendmail

Exports mail activity statistics from sendmail.

pmdashping

Exports performance metrics for the availability and quality of service (response-time) for arbitrary shell commands.

pmdasnmp

Extracts SNMP performance metrics from local or remote SNMP-enabled devices.

pmdasummary

Derives performance metrics values from values made available by other PMDAs. It is a PMDA itself.

pmdasystemd

Extracts performance metrics from the systemd and journald services.

pmdatrace

Exports transaction performance metrics from application processes that use the pcp_trace library.

pmdavmware

Extracts performance metrics from a VMWare virtualization host.

pmdaweblog

Scans Web-server logs to extract metrics characterizing.

pmdaxfs

Extracts performance metrics from the Linux kernel XFS filesystem implementation.

pmdumplog

Displays selected state information, control data, and metric values from a set of PCP archive logs created by pmlogger.

pmlc

Exercises control over an instance of the PCP archive logger pmlogger, to modify the profile of which metrics are logged and/or how frequently their values are logged.

pmlogcheck

Performs integrity check for individual PCP archives.

pmlogconf

Creates or modifies pmlogger configuration files for many common logging scenarios, optionally probing for available metrics and enabled functionality. It can be run either interactively or from scripts for automating the setup of data logging (the PCP start scripts do this, for example, to generate a default configuration).

pmlogextract

Reads one or more PCP archive logs and creates a temporally merged and reduced PCP archive log as output.

pmlogger

Creates PCP archive logs of performance metrics over time. Many tools accept these PCP archive logs as alternative sources of metrics for retrospective analysis.

pmproxy

Provides REST APIs, archive discovery, and both PCP and Redis protocol proxying when executing PCP or Redis client tools through a network firewall system.

pmtrace

Provides a simple command line interface to the trace PMDA and its associated pcp_trace library.

1.3.3. Operational and Infrastructure Support

PCP provides the following tools to support the PCP infrastructure and assist operational procedures for PCP deployment in a production environment:

pcp

Summarizes that state of a PCP installation.

pmdbg

Describes the available facilities and associated control flags. PCP tools include internal diagnostic and debugging facilities that may be activated by run-time flags.

pmerr

Translates PCP error codes into human-readable error messages.

pmhostname

Reports hostname as returned by gethostbyname. Used in assorted PCP management scripts.

pmie_check

Administration of the Performance Co-Pilot inference engine (pmie).

pmlock

Attempts to acquire an exclusive lock by creating a file with a mode of 0.

pmlogger_*

Allows you to create a customized regime of administration and management for PCP archive log files. The pmlogger_check, pmlogger_daily, and pmlogger_merge scripts are intended for periodic execution via the cron command.

pmnewlog

Performs archive log rotation by stopping and restarting an instance of pmlogger.

pmnsadd

Adds a subtree of new names into a PMNS, as used by the components of PCP.

pmnsdel

Removes a subtree of names from a PMNS, as used by the components of the PCP.

pmnsmerge

Merges multiple PMNS files together, as used by the components of PCP.

pmstore

Reinitializes counters or assigns new values to metrics that act as control variables. The command changes the current values for the specified instances of a single performance metric.

1.3.4. Application and Agent Development

The following PCP tools aid the development of new programs to consume performance data, and new agents to export performance data within the PCP framework:

chkhelp

Checks the consistency of performance metrics help database files.

dbpmda

Allows PMDA behavior to be exercised and tested. It is an interactive debugger for PMDAs.

newhelp

Generates the database files for one or more source files of PCP help text.

pmapi

Defines a procedural interface for developing PCP client applications. It is the Performance Metrics Application Programming Interface (PMAPI).

pmclient

Is a simple client that uses the PMAPI to report some high-level system performance metrics.

pmda

Is a library used by many shipped PMDAs to communicate with a pmcd process. It can expedite the development of new and custom PMDAs.

pmgenmap

Generates C declarations and cpp(1) macros to aid the development of customized programs that use the facilities of PCP. It is a PMDA development tool.